Key safes with RFID technology

This key safe uses RFID technology as an access control system. Authorised individuals are given access to the key safe with the registered transponder medium. The process is automatic and contactless. There’s no need to use another key or input a code. Enable employees and service providers to efficiently gain access even outside of operating and opening hours – around the clock – while you retain complete control. The key safe at a glance: Contactless identification of up to 50 individual access media No internet or power connection required. The lock is battery-operated (with two AAA batteries), which allows 15,000 opening operations If the red LED lights up, this indicates that the battery is low Resistant to external influences like dirt or moisture, making it suitable for continuous outdoor use Robust, brushed stainless steel housing with an elegant finish (V2A) Technology The key safe supports the following RFID standards: MIFARE Classic 1K MIFARE Classic 4K MIFARE DESFire EV1 MIFARE DESFire EV2 MIFARE Ultralight EV1 Existing RFID media that meet these standards can be used, no new RFID media need to be purchased. Data is exchanged between the transponder and the reader by means of an (electro-)magnetic field. The passive transponder is supplied with energy as soon as it approaches the reader, thus enabling data exchange. There is no need for an internet or power connection. The closing motor, on the other hand, is battery-operated and allows up to 15,000 opening operations with just two AAA batteries. Access allocation The enclosed master card allows you to flexibly add new users and remove existing ones. From the time they are added, registered users will have access to the key safe and be able to open it contactlessly using their access medium. In contrast, unregistered media will be unable to unlock the lock. Material and space requirements The housing made of high-quality stainless steel measuring 2 mm thick is sturdy, secure and weatherproof. The RFID lock is also resistant to the elements and, with its protected electronics, is ideally suited to outdoor use. When lithium batteries are used, the key safe can also be used in extreme weather conditions (-40° to +60° Celsius). The interior of the safe offers plenty space. The three hooks on the back wall can even accommodate chunky keys (e.g. keys with fobs or vehicle keys).

This key safe uses RFID technology as an access control system. Authorised individuals are given access to the key safe with the registered transponder medium. The process is automatic and contactless. There’s no need to use another key or input a code. Enable employees and service providers to efficiently gain access even outside of operating and opening hours – around the clock – while you retain complete control. The key safe at a glance: Contactless identification of up to 50 individual access media No internet or power connection required. The lock is battery-operated (with two AAA batteries), which allows 15,000 opening operations If the red LED lights up, this indicates that the battery is low Resistant to external influences like dirt or moisture, making it suitable for continuous outdoor use Robust, brushed stainless steel housing with an elegant finish (V2A) Technology The key safe supports the following RFID standards: MIFARE Classic 1K MIFARE Classic 4K MIFARE DESFire EV1 MIFARE DESFire EV2 MIFARE Ultralight EV1 Existing RFID media that meet these standards can be used, no new RFID media need to be purchased. Data is exchanged between the transponder and the reader by means of an (electro-)magnetic field. The passive transponder is supplied with energy as soon as it approaches the reader, thus enabling data exchange. There is no need for an internet or power connection. The closing motor, on the other hand, is battery-operated and allows up to 15,000 opening operations with just two AAA batteries. Access allocation The enclosed master card allows you to flexibly add new users and remove existing ones. From the time they are added, registered users will have access to the key safe and be able to open it contactlessly using their access medium. In contrast, unregistered media will be unable to unlock the lock. Material and space requirements The housing made of high-quality stainless steel measuring 2 mm thick is sturdy, secure and weatherproof. The RFID lock is also resistant to the elements and, with its protected electronics, is ideally suited to outdoor use. When lithium batteries are used, the key safe can also be used in extreme weather conditions (-40° to +60° Celsius). The interior of the safe offers plenty space. The three hooks on the back wall can even accommodate chunky keys (e.g. keys with fobs or vehicle keys).

This key safe uses RFID technology as an access control system. Authorised individuals are given access to the key safe with the registered transponder medium. The process is automatic and contactless. There’s no need to use another key or input a code. Enable employees and service providers to efficiently gain access even outside of operating and opening hours – around the clock – while you retain complete control. The 2121 RFID key safe at a glance: Contactless identification of up to 50 individual access media No internet or power connection required. The lock is battery-operated (with two AAA batteries), which allows 15,000 opening operations If the red LED lights up, this indicates that the battery is low Resistant to external influences like dirt or moisture, making it suitable for continuous outdoor use Robust, brushed stainless steel housing with an elegant finish (V2A) Particularly secure due to the three-point lock and wall thickness of 3 mm Suitable for outdoor use Technology The key safe supports the following RFID standards: MIFARE Classic 1K MIFARE Classic 4K MIFARE DESFire EV1 MIFARE DESFire EV2 MIFARE Ultralight EV1 Existing RFID media that meet these standards can be used, no new RFID media need to be purchased. Data is exchanged between the transponder and the reader by means of an (electro-)magnetic field. The passive transponder is supplied with energy as soon as it approaches the reader, thus enabling data exchange. There is no need for an internet or power connection. The closing motor, on the other hand, is battery-operated and allows up to 15,000 opening operations with just two AAA batteries. Access allocation The enclosed master card allows you to flexibly add new users and remove existing ones. From the time they are added, registered users will have access to the key safe and be able to open it contactlessly using their access medium. In contrast, unregistered media will be unable to unlock the lock. Material and space requirements The housing made of high-quality stainless steel measuring 3 mm thick is sturdy, secure and weatherproof. The RFID lock is also resistant to the elements and, with its protected electronics, is ideally suited to outdoor use. When lithium batteries are used, the key safe can also be used in extreme weather conditions (-40° to +60° Celsius). The interior of the safe offers plenty space. The three hooks on the back wall can even accommodate chunky keys (e.g. keys with fobs or vehicle keys).

This key safe uses RFID technology as an access control system. Authorised individuals are given access to the key safe with the registered transponder medium. The process is automatic and contactless. There’s no need to use another key or input a code. Enable employees and service providers to efficiently gain access even outside of operating and opening hours – around the clock – while you retain complete control. The 2121 RFID key safe at a glance: Contactless identification of up to 50 individual access media No internet or power connection required. The lock is battery-operated (with two AAA batteries), which allows 15,000 opening operations If the red LED lights up, this indicates that the battery is low Resistant to external influences like dirt or moisture, making it suitable for continuous outdoor use Robust, brushed stainless steel housing with an elegant finish (V2A) Particularly secure due to the three-point lock and wall thickness of 3 mm Suitable for outdoor use Technology The key safe supports the following RFID standards: MIFARE Classic 1K MIFARE Classic 4K MIFARE DESFire EV1 MIFARE DESFire EV2 MIFARE Ultralight EV1 Existing RFID media that meet these standards can be used, no new RFID media need to be purchased. Data is exchanged between the transponder and the reader by means of an (electro-)magnetic field. The passive transponder is supplied with energy as soon as it approaches the reader, thus enabling data exchange. There is no need for an internet or power connection. The closing motor, on the other hand, is battery-operated and allows up to 15,000 opening operations with just two AAA batteries. Access allocation The enclosed master card allows you to flexibly add new users and remove existing ones. From the time they are added, registered users will have access to the key safe and be able to open it contactlessly using their access medium. In contrast, unregistered media will be unable to unlock the lock. Material and space requirements The housing made of high-quality stainless steel measuring 3 mm thick is sturdy, secure and weatherproof. The RFID lock is also resistant to the elements and, with its protected electronics, is ideally suited to outdoor use. When lithium batteries are used, the key safe can also be used in extreme weather conditions (-40° to +60° Celsius). The interior of the safe offers plenty space. The three hooks on the back wall can even accommodate chunky keys (e.g. keys with fobs or vehicle keys).

The 2126 RFID key safe is the XL version of our 2121 RFID key safe and offers space for up to 21 keys. The 21 key hooks can be removed if necessary to enable storage and handover of larger items like tablets and laptops. This key safe uses RFID technology as an access control system. Authorised individuals are given access to the key safe with the registered transponder medium. The process is automatic and contactless. There’s no need to use another key or input a code. Enable employees and service providers to efficiently gain access even outside of operating and opening hours – around the clock – while you retain complete control. The 2126 RFID key safe at a glance: Contactless identification of up to 50 individual access media No internet or power connection required. The lock is battery-operated (with two AAA batteries), which allows 15,000 opening operations If the red LED lights up, this indicates that the battery is low Resistant to external influences like dirt or moisture, making it suitable for continuous outdoor use Robust, brushed stainless steel housing with an elegant finish (V2A) Particularly secure due to the three-point lock and wall thickness of 3 mm Suitable for outdoor use Space for up to 21 keys Technology The key safe supports the following RFID standards: MIFARE Classic 1K MIFARE Classic 4K MIFARE DESFire EV1 MIFARE DESFire EV2 MIFARE Ultralight EV1 Existing RFID media that meet these standards can be used, no new RFID media need to be purchased. Data is exchanged between the transponder and the reader by means of an (electro-)magnetic field. The passive transponder is supplied with energy as soon as it approaches the reader, thus enabling data exchange. There is no need for an internet or power connection. The closing motor, on the other hand, is battery-operated and allows up to 15,000 opening operations with just two AAA batteries. Access allocation The enclosed master card allows you to flexibly add new users and remove existing ones. From the time they are added, registered users will have access to the key safe and be able to open it contactlessly using their access medium. In contrast, unregistered media will be unable to unlock the lock. Material and space requirements The housing made of high-quality stainless steel measuring 3 mm thick is sturdy, secure and weatherproof. The RFID lock is also resistant to the elements and, with its protected electronics, is ideally suited to outdoor use. When lithium batteries are used, the key safe can also be used in extreme weather conditions (-40° to +60° Celsius). There is plenty of space inside the safe with 21 key hooks that can be removed as an option.

The 2146 RFID key safe is the XL version of our 2141 RFID key safe and offers space for up to 21 keys. The 21 key hooks can be removed if necessary to enable storage and handover of larger items like tablets and laptops. This key safe uses RFID technology as an access control system. Authorised individuals are given access to the key safe with the registered transponder medium. The process is automatic and contactless. There’s no need to use another key or input a code. Enable employees and service providers to efficiently gain access even outside of operating and opening hours – around the clock – while you retain complete control. The 2146 RFID key safe at a glance: Contactless identification of up to 50 individual access media No internet or power connection required. The lock is battery-operated (with two AAA batteries), which allows 15,000 opening operations If the red LED lights up, this indicates that the battery is low Resistant to external influences like dirt or moisture, making it suitable for continuous outdoor use Robust, brushed stainless steel housing with an elegant finish (AISI 316) Particularly secure due to the three-point lock and wall thickness of 3 mm Suitable for outdoor use Space for up to 21 keys Technology The key safe supports the following RFID standards: MIFARE Classic 1K MIFARE Classic 4K MIFARE DESFire EV1 MIFARE DESFire EV2 MIFARE Ultralight EV1 Existing RFID media that meet these standards can be used, no new RFID media need to be purchased. Data is exchanged between the transponder and the reader by means of an (electro-)magnetic field. The passive transponder is supplied with energy as soon as it approaches the reader, thus enabling data exchange. There is no need for an internet or power connection. The closing motor, on the other hand, is battery-operated and allows up to 15,000 opening operations with just two AAA batteries. Access allocation The enclosed master card allows you to flexibly add new users and remove existing ones. From the time they are added, registered users will have access to the key safe and be able to open it contactlessly using their access medium. In contrast, unregistered media will be unable to unlock the lock. Material and space requirements The housing made of high-quality stainless steel measuring 3 mm thick is sturdy, secure and weatherproof. The RFID lock is also resistant to the elements and, with its protected electronics, is ideally suited to outdoor use. When lithium batteries are used, the key safe can also be used in extreme weather conditions (-40° to +60° Celsius). There is plenty of space inside the safe with 21 key hooks that can be removed as an option.

The masunt Compartment safe 3062 online optimises key and access media management and handover. Access permissions can be conveniently controlled using the web portal. Connection to proprietary platforms or applications is an option too. The keys are continuously available and can be handed over with zero contact. All key movements can be documented in full. The stainless steel housing with six compartments provides protection against unauthorised access, is weatherproof and enables continuous outdoor use. Our compartment safes are designed for an ambient temperature of up to +60 degrees Celsius. This means that the devices can be operated both indoors and outdoors. When installing outdoors, please take care to ensure that the device is protected from continuous, direct sunlight. If you have any questions or need help with the installation, we will be happy to advise you. The access codes can be generated using the app or web portal and then communicated to the customer. They are granted access by entering a numerical code or using an RFID transponder (MIFARE Ultralight, MIFARE Plus, MIFARE Classic and MIFARE Desfire proximity cards, identity cards, e-passports and ICODE, iClass and Skidata vicinity cards). Removals and returns are recorded in an easy-to-understand manner. To manage and control the safe deposit box, you need to purchase the "masunt connect Basic" item. Please add this to your shopping basket. If you want to connect the safe deposit box to a third-party software system via the interface, you will need to purchase the "masunt connect PRO or PRO+" item. The masunt Compartment safe 3062 online at a glance: For outdoor use: Robust stainless steel body (AISI 304 or AISI 316) with walls measuring 2 mm thick. The compartments are protected from dust and rain by insulation Easy remote connection and management: Access management can be controlled using the iOS app, the PWA or the web portal Efficient key management: Convenient access by means of a numerical code or an RFID medium with access logging. Complete control over keys, with certainty that only authorised individuals can access them Illuminated keypad for operation at night Connection using 230 V (power) and over LAN (internet) Prepared for installation on load-bearing walls Individual compartments have an emergency opening function thanks to the electronics compartment Can be expanded indefinitely in theory thanks to the additional module (six or 12 compartments) Ambient temperature: up to +60 degrees Celsius Material and different versions Like all products in our range, the compartment safes are available in two different types of stainless steel. In addition to the AISI 304 version, we also offer an alternative version with AISI 316 stainless steel, which is characterised by particularly high corrosion resistance. This should be used wherever there is a high salt content in the air, i.e. in coastal areas. The standard version offers space for a key ring. If it is necessary to hand over documents in addition to a key or several keys, you can also opt for the version with deep compartments. It offers enough space for documents in DIN A5 format, such as vehicle licences, booking documents, etc.</p

Electronic key management with complete control over access and use with the masunt Compartment safe 3122 online. Hotels that want to ensure their keys are available 24/7 with contactless access and corresponding movement documentation benefit from this solution in particular. The 12 compartments, which can be controlled separately, are large enough to securely store even chunky hotel keys. The solid stainless steel housing provides protection against the elements and unauthorised access. Our compartment safes are designed for an ambient temperature of up to +60 degrees Celsius. This means that the devices can be operated both indoors and outdoors. When installing outdoors, please take care to ensure that the device is protected from continuous, direct sunlight. If you have any questions or need help with the installation, we will be happy to advise you. To manage and control the safe deposit box, you need to purchase the "masunt connect Basic" item. Please add this to your shopping basket. If you want to connect the safe deposit box to a third-party software system via the interface, you will need to purchase the "masunt connect PRO or PRO+" item. The masunt Compartment safe 3122 online at a glance: For outdoor use: Robust stainless steel body (AISI 304 or AISI 316) with walls measuring 2 mm thick. The compartments are protected from dust and rain by insulation Easy remote connection and management Access management can be controlled using the iOS app, the PWA or the web portal Efficient key management: Convenient access by means of a numerical code or an RFID medium (MIFARE Ultralight, MIFARE Plus, MIFARE Classic and MIFARE Desfire proximity cards, identity cards, e-passports and ICODE, iClass and Skidata vicinity cards). Access logging and thus complete control over keys, with certainty that only authorised individuals can access them Illuminated keypad for operation at night Connection using 230 V (power) and over LAN (internet) Prepared for installation on load-bearing walls Individual compartments have an emergency opening function thanks to the electronics compartment Can be expanded indefinitely in theory thanks to the additional module (six or 12 compartments) Ambient temperature: up to +60 degrees Celsius Material and different versions Like all products in our range, the compartment safes are available in two different types of stainless steel. In addition to the AISI 304 version, we also offer an alternative version with AISI 316 stainless steel, which is characterised by particularly high corrosion resistance. This should be used wherever there is a high salt content in the air, i.e. in coastal areas. The standard version offers space for a key ring. If it is necessary to hand over documents in addition to a key or several keys, you can also opt for the version with deep compartments. It offers enough space for documents in DIN A5 format, such as vehicle licences, booking documents, etc.</p

The masunt Compartment Safe 3060 is the module for extending an existing compartment safe (only compatible with models with the Online function, i.e. the 3062 and 3122 compartment safes) to include another six compartments. The add-on safe is controlled using the existing compartment safe and expands it comprehensively and functionally. Material and different versions Like all products in our range, the extensions are available in two different types of stainless steel. In addition to the AISI 304 version, we also offer an alternative version with AISI 316 stainless steel, which is characterised by particularly high corrosion resistance. This should be used wherever there is a high salt content in the air, i.e. in coastal areas. The standard version offers space for a key ring. If it is necessary to hand over documents in addition to a key or several keys, you can also opt for the version with deep compartments. It offers enough space for documents in DIN A5 format, such as vehicle licences, booking documents, etc.</p

The masunt Compartment Safe 3120 is the module for extending an existing compartment safe (only compatible with models with the Online function, i.e. the 3062 and 3122 compartment safes) to include another twelve compartments. The add-on safe is controlled using the existing compartment safe and expands it comprehensively and functionally. Material and different versions Like all products in our range, the extensions are available in two different types of stainless steel. In addition to the AISI 304 version, we also offer an alternative version with AISI 316 stainless steel, which is characterised by particularly high corrosion resistance. This should be used wherever there is a high salt content in the air, i.e. in coastal areas. The standard version offers space for a key ring. If it is necessary to hand over documents in addition to a key or several keys, you can also opt for the version with deep compartments. It offers enough space for documents in DIN A5 format, such as vehicle licences, booking documents, etc.</p

The masunt Compartment safe 4062 online enables flexible, electronic key management. Due to its high security features, the solid locker safe made of weatherproof stainless steel is particularly suitable for storing and handing over car keys together with the associated documents. Our compartment safes are designed for an ambient temperature of up to +60 degrees Celsius. This means that the devices can be operated both indoors and outdoors. When installing outdoors, please take care to ensure that the device is protected from continuous, direct sunlight. If you have any questions or need help with the installation, we will be happy to advise you. Thanks to the Online functionality (app- or web-based), access instances and openings can be controlled remotely too. Opening is performed by entering a numerical code or with a linked RFID medium (MIFARE Ultralight, MIFARE Plus, MIFARE Classic and MIFARE Desfire proximity cards, identity cards, e-passports and ICODE, iClass and Skidata vicinity cards). Removals and returns are recorded in an easy-to-understand manner. So key handovers can be organised securely and reliably even outside of operating hours. To manage and control the compartment safe, you need to purchase the ‘Using the ONLINE compartment safe on connect.masunt.com’ item. Please add this to the shopping basket. The masunt Compartment safe 4062 online at a glance: Robust for continuous outdoor use: Solid stainless steel body (AISI 304 or AISI 316) with walls measuring 3 mm thick. Easy remote connection and management: Access management can be controlled using the iOS app, the PWA or the web portal Efficient key management: Convenient access by means of a numerical code or an RFID medium. Access logging and thus complete control over keys, with certainty that only authorised individuals can access them Connection using 230 V (power) and over LAN (internet) Prepared for installation on load-bearing walls Individual compartments have an emergency opening function thanks to the electronics compartment Can be expanded to include another six compartments each using add-on modules Ambient temperature: up to +60 degrees Celsius

The masunt Compartment Safe 4060 is the module for extending an existing compartment safe (only compatible with models with the Online function, i.e. the 3062 and 3122 compartment safes) to include another six compartments. The add-on safe is controlled using the existing compartment safe and expands it comprehensively and functionally.

Connecting the compartment safe ONLINE allows you to manage and control the unit using the web portal Description: You must purchase this item to be able to use the ONLINE compartment safes. Once you have purchased this item, you will receive an email containing instructions on how to connect your safe. The cost of using the service is €99 (price excl. VAT) per safe (main module), per year. A main module can be expanded almost indefinitely by purchasing extension modules. There are no extra charges for the licence here. The service is automatically extended once per year for another year if it is not cancelled 30 days before the end of the activation period.

The purchase of this item is required if you want to use our safe deposit boxes with third-party software systems. This can be the use of an existing software link to a third-party provider, or the use of our API (open interface) for your own solutions. masunt connect PRO or PRO+ therefore includes masunt connect BASIC & the use of the API. One licence is valid for one main module. Depending on the number of compartments, the following items must be purchased: PRO: maximum 24 compartments PRO+: 25-48 compartments You can select the desired number in the drop-down menu above. The service is automatically renewed annually for a further year if it is not cancelled 30 days before the end of the activation period.

The masunt installation service consists of an all-inclusive package from planning and installation to instruction in using the hardware and software for our stainless steel products.Our technicians professionally install your purchased masunt product – wherever you are. All the advantages of the installation and setup service at a glance: Installation throughout Germany (throughout Europe too on request) On schedule and reliable for your use case Professional planning and installation (surface-mounted and flush-mounted possible) Software setup so the product can be used directly Extensive technical briefing following installation masunt products can be mounted on your wall or, alternatively, we can supply you with a standalone wall so you can attach the masunt products securely. Our technician will be delighted to help you on site with any technical questions you might have regarding using the purchased product. To install your masunt product, you need a load-bearing surface and any required cables (e.g. power or LAN connection). We will be more than happy to advise you on your individual installation situation and provide you with a free, non-binding quotation for your use case. Call us on +49 (0)40 716 629 905   Send us an email on info(at)masunt.com info(at)masunt.com  Let us call you back with our callback service

Particularly when our stainless steel products are installed outdoors, flash rust can form over time (especially near the coast), negatively impacting the appearance of the stainless steel finish. The high-quality stainless steel finish is preserved in the long term too thanks to the cleaning and care set developed specifically for our products. The stainless steel care oil prevents small particles that later go on to form flash rust from sticking to our solutions. Depending on the weather conditions, we recommend using the care oil and a microfibre polishing cloth to treat your product one to three times a year. If flash rust has already formed on your product, removing it to restore your product to its sparkling splendour is child’s play with the cleaning and polishing paste and the supplied special sponge. The four-part set is the ideal addition for all our stainless steel products: Stainless steel care oil Microfibre polishing cloth Cleaning and polishing paste for metals Sponge  

The RFID smart cards have the MIFARE Classic 1k standard and are compatible with the key safes of the R Code series and with the online variants of our compartment safes.