masunt Service safe XL 640 | Extra corrosion resistant

The Key Depot Standard is a small compact deposit box which can be used for storing and depositing keys. Thanks to its simple structure this key depot is an inexpensive entry-level model. Nevertheless, all walls have a thickness of 3 mm and the safe is entirely manufactured of brushed stainless steel. When using a profile half-cylinder from the fire department, it can be used as a fire department depot (corresponds to DIN 14 675 -FSD 1). Properties: Suitable for outdoor use 3mm wall thickness on all sides Stainless steel, brushed 2 key hooks Optionally available in V2A (AISI 304) or V4A (AISI 316) stainless steel Prepared for profile half-cylinder 30/10 mm (no included in delivery) The depot can be mounted either vertically or horizontally, both surface-mounted or flush-mounted. Screws and dowels for standard masonry are included in the delivery. Mount via two elongated holes at the back of the housing.

The Key depot 242 credit card is a small compact deposit box which can be used for storing and depositing keys. In addition, the compartment has space for a storing a credit card-sized card. Thanks to its simple structure this key depot is an inexpensive entry-level model. Nevertheless, all walls have a thickness of 3 mm and the safe is entirely manufactured of brushed stainless steel. When using a profile half-cylinder from the fire department, it can be used as a fire department depot (corresponds to DIN 14 675 -FSD 1). The Key depot 242 credit card at a glance: Suitable for outdoor use 3mm wall thickness on all sides Stainless steel AISI 316, brushed 1 key hook Also avaiable in AISI 304 (masunt Key depot 222 credit card prepared PHZ) Prepared for profile half-cylinder 30/10 mm (no included in delivery) Installation Key depot credit card The depot can be mounted either vertically or horizontally, both surface-mounted or flush-mounted. Screws and dowels for standard masonry are included in the delivery. Mount via two elongated holes at the back of the housing.

The Key Depot XL is a compact deposit box which can be used for storing keys. This depot offers space for extra-long keys (up to a length of 160 mm) as well as for a small document in DIN A6 format. Thanks to its simple structure this key depot is an inexpensive entry-level model. Nevertheless, all walls have a thickness of 3 mm and the safe is entirely manufactured of brushed stainless steel. When using a profile half-cylinder from the fire department, it can be used as a fire department depot (corresponds to DIN 14 675 -FSD 1). Properties: Suitable for outdoor use 3mm wall thickness on all sides Stainless steel, brushed 1 key hook Space for a document in A6 format Optionally available in V2A (AISI 304) or V4A (AISI 316) stainless steel Prepared for profile half-cylinder 30/10 mm (no included in delivery) The depot can be mounted either vertically or horizontally, both surface-mounted or flush-mounted. Screws and dowels for standard masonry are included in the delivery. Mount via two elongated holes at the back of the housing.

The masunt key deposit box is used to store and deposit property keys or other access media.The housing’s walls are 3 mm thick, and are optionally available in stainless steel quality AISI 304 or AISI 316.Use as a fire brigade key deposit box – in line with DIN 14 675 – FSD 1 – when using a fire brigade profile half cylinder.A profile half cylinder (PHC) measuring 30 / 10 mm long is required (not included in the scope of supply).The product is also available with a PHC already installed at the following link:LINKA seal in the key deposit box’s frame ensures faultless door locking.The key deposit box is attached using two slots on the rear (the fastening material for standard masonry is included in the scope of supply).Both surface and flush-mounted installation are possible. Product can be mounted horizontally as well as vertically.

The masunt Key deposit box 740 is suitable for integration into an extremely wide range of third-party systems. Integration and opening are carried out by means of a floating contact (12 V (DC)). It also has an emergency opening function. A profile half-cylinder (30 / 10 mm) is already included in the scope of delivery and can be easily replaced. The safe also has a status indicator (lock open / closed). The interior is insulated. The housing is made of stainless steel (V2A) measuring 3 mm thick on all sides and is designed such that it is difficult to force it open from the outside. Installation is performed using the two slotted holes on the back of the safe. In the compartment where the two locks are installed, there is a hole on the back wall to feed through cables. The solution has been developed for integration into bell systems, lift systems and fire alarm systems, and can easily be used in many other systems. The safe is operated as follows: The safe has an electronic lock inside. This must be controlled externally with a 12 V contact circuit. When an opening signal is given, the safe’s door springs open and the interior can be accessed. Pressing on the door causes it to snap back into the electronic lock, and the safe is then locked again. In the event of a power failure, the profile half-cylinder (PC) visible on the side can be operated with a key. The closing lug of the PC thus presses on a mechanical emergency opening switch on the electronic lock, which also causes the door to spring open.

The masunt key deposit box is used to store and deposit property keys or other access media.The housing’s walls are 3 mm thick, and are optionally available in stainless steel quality AISI 304 or AISI 316.A profile half cylinder (PHC) measuring 30 / 10 mm long is required (included in the scope of supply).The PHC used has the following properties:Adjustable locking nose, three cylinder keys, five pin tumblers, nickel-plated brass,tested in line with DIN 18252:2006-12, DIN 18252-10, DIN EN1303:2005-04 reg. no. 8v68The product is also available without a PHC at the following link:LINKA seal in the key deposit box’s frame ensures faultless door locking.The key deposit box is attached using two slots on the rear (the fastening material for standard masonry is included in the scope of supply).Both surface and flush-mounted installation are possible. Product can be mounted horizontally as well as vertically. Measures:129 (H) / 74 (L) / 78 (D) mm; weight approx. 1.2 kgs

The masunt key depot pre-prepared PHZ 840 is the largest depot in our range and is used wherever something else needs to be handed over in addition to one or more keys. The spacious interior offers enough room even for particularly large keys. The 840 model is a symbiosis of two of our classics. The design is based on the 1120 E Code key safe, the functionality corresponds to the M3. Thus the depot is prepared for mechanical and electronic profile half cylinders (30/10 mm). The masunt key depot prepared PHZ 840 at a glance: Suitable for outdoor use Brushed stainless steel Spacious interior compartment Available in V2A (AISI 304) or V4A (AISI 316) stainless steel Prepared for mechanical or electronic profile half cylinder 30 / 10 mm (not included in delivery)