Wall for free-standing installation I Wall for E Code, M Code & R Code models (AISI 304)
€799.00*
Net price: €671.43
VAT: €127.57
VAT: €127.57
Available, delivery time: 1-3 days
* for deliveries to Germany. Delivery times for other countries can be found here
Product number:
KSC001
Product information "Wall for free-standing installation I Wall for E Code, M Code & R Code models (AISI 304) "
The masunt E Code and R Code models can basically be surface-mounted and flush-mounted. If you would like a free-standing stainless steel wall, the wall shown as an example can be supplied too, fitted with different E Code models.
The wall for holding the E Code and R Code key safes is fitted with a roof with rain drainage and can be robustly anchored to the ground.
The free-standing wall can be supplied either as a screw-on or embedding version.
The price refers to the wall only, and the respective product to be mounted on the wall must be added.
You will find the products you can choose from here: E Codes category and R Codes category
Delivery with a pre-assembled product is included in the price.
The on-site assembly in question can be booked here too: Installation and setup service Montage- und Einrichtungsservice
| Manufacturer WEEE: | 65843376 |
|---|
Details about manufactor masunt
Contact:
Resatur GmbH | masunt | Klopstockstraße 5 | 22765 Hamburg I www.masunt.com | [email protected] | +49 (0)40 716 629 905
Login
Data sheets - Safety Instructions
Dimensions:
286 (W) x 1500 (H) x 100 (D) mm
The dimensions of the upper section are adjusted to the selected key safe model.
The dimensions of the upper section are adjusted to the selected key safe model.
Skip product gallery
Zubehör
masunt Key safe 1121 RFID
€349.00*
This key safe uses RFID technology as an access control system.
Authorised individuals are given access to the key safe with the registered transponder medium. The process is automatic and contactless. There’s no need to use another key or input a code. Enable employees and service providers to efficiently gain access even outside of operating and opening hours – around the clock – while you retain complete control.
The key safe at a glance:
Contactless identification of up to 50 individual access media
No internet or power connection required. The lock is battery-operated (with two AAA batteries), which allows 15,000 opening operations
If the red LED lights up, this indicates that the battery is low
Resistant to external influences like dirt or moisture, making it suitable for continuous outdoor use
Robust, brushed stainless steel housing with an elegant finish (V2A)
Technology
The key safe supports the following RFID standards:
MIFARE Classic 1K
MIFARE Classic 4K
MIFARE DESFire EV1
MIFARE DESFire EV2
MIFARE Ultralight EV1
Existing RFID media that meet these standards can be used, no new RFID media need to be purchased.
Data is exchanged between the transponder and the reader by means of an (electro-)magnetic field. The passive transponder is supplied with energy as soon as it approaches the reader, thus enabling data exchange. There is no need for an internet or power connection. The closing motor, on the other hand, is battery-operated and allows up to 15,000 opening operations with just two AAA batteries.
Access allocation
The enclosed master card allows you to flexibly add new users and remove existing ones. From the time they are added, registered users will have access to the key safe and be able to open it contactlessly using their access medium. In contrast, unregistered media will be unable to unlock the lock.
Material and space requirements
The housing made of high-quality stainless steel measuring 2 mm thick is sturdy, secure and weatherproof. The RFID lock is also resistant to the elements and, with its protected electronics, is ideally suited to outdoor use.
When lithium batteries are used, the key safe can also be used in extreme weather conditions (-40° to +60° Celsius).
The interior of the safe offers plenty space. The three hooks on the back wall can even accommodate chunky keys (e.g. keys with fobs or vehicle keys).
Prices incl. VAT plus shipping costs
masunt Key safe 2121 RFID
€399.00*
This key safe uses RFID technology as an access control system.
Authorised individuals are given access to the key safe with the registered transponder medium. The process is automatic and contactless. There’s no need to use another key or input a code. Enable employees and service providers to efficiently gain access even outside of operating and opening hours – around the clock – while you retain complete control.
The 2121 RFID key safe at a glance:
Contactless identification of up to 50 individual access media
No internet or power connection required. The lock is battery-operated (with two AAA batteries), which allows 15,000 opening operations
If the red LED lights up, this indicates that the battery is low
Resistant to external influences like dirt or moisture, making it suitable for continuous outdoor use
Robust, brushed stainless steel housing with an elegant finish (V2A)
Particularly secure due to the three-point lock and wall thickness of 3 mm
Suitable for outdoor use
Technology
The key safe supports the following RFID standards:
MIFARE Classic 1K
MIFARE Classic 4K
MIFARE DESFire EV1
MIFARE DESFire EV2
MIFARE Ultralight EV1
Existing RFID media that meet these standards can be used, no new RFID media need to be purchased.
Data is exchanged between the transponder and the reader by means of an (electro-)magnetic field. The passive transponder is supplied with energy as soon as it approaches the reader, thus enabling data exchange. There is no need for an internet or power connection. The closing motor, on the other hand, is battery-operated and allows up to 15,000 opening operations with just two AAA batteries.
Access allocation
The enclosed master card allows you to flexibly add new users and remove existing ones. From the time they are added, registered users will have access to the key safe and be able to open it contactlessly using their access medium. In contrast, unregistered media will be unable to unlock the lock.
Material and space requirements
The housing made of high-quality stainless steel measuring 3 mm thick is sturdy, secure and weatherproof. The RFID lock is also resistant to the elements and, with its protected electronics, is ideally suited to outdoor use.
When lithium batteries are used, the key safe can also be used in extreme weather conditions (-40° to +60° Celsius).
The interior of the safe offers plenty space. The three hooks on the back wall can even accommodate chunky keys (e.g. keys with fobs or vehicle keys).
Prices incl. VAT plus shipping costs
masunt Key safe XL 2126 RFID
€799.00*
The 2126 RFID key safe is the XL version of our 2121 RFID key safe and offers space for up to 21 keys. The 21 key hooks can be removed if necessary to enable storage and handover of larger items like tablets and laptops.
This key safe uses RFID technology as an access control system.
Authorised individuals are given access to the key safe with the registered transponder medium. The process is automatic and contactless. There’s no need to use another key or input a code. Enable employees and service providers to efficiently gain access even outside of operating and opening hours – around the clock – while you retain complete control.
The 2126 RFID key safe at a glance:
Contactless identification of up to 50 individual access media
No internet or power connection required. The lock is battery-operated (with two AAA batteries), which allows 15,000 opening operations
If the red LED lights up, this indicates that the battery is low
Resistant to external influences like dirt or moisture, making it suitable for continuous outdoor use
Robust, brushed stainless steel housing with an elegant finish (V2A)
Particularly secure due to the three-point lock and wall thickness of 3 mm
Suitable for outdoor use
Space for up to 21 keys
Technology
The key safe supports the following RFID standards:
MIFARE Classic 1K
MIFARE Classic 4K
MIFARE DESFire EV1
MIFARE DESFire EV2
MIFARE Ultralight EV1
Existing RFID media that meet these standards can be used, no new RFID media need to be purchased.
Data is exchanged between the transponder and the reader by means of an (electro-)magnetic field. The passive transponder is supplied with energy as soon as it approaches the reader, thus enabling data exchange. There is no need for an internet or power connection. The closing motor, on the other hand, is battery-operated and allows up to 15,000 opening operations with just two AAA batteries.
Access allocation
The enclosed master card allows you to flexibly add new users and remove existing ones. From the time they are added, registered users will have access to the key safe and be able to open it contactlessly using their access medium. In contrast, unregistered media will be unable to unlock the lock.
Material and space requirements
The housing made of high-quality stainless steel measuring 3 mm thick is sturdy, secure and weatherproof. The RFID lock is also resistant to the elements and, with its protected electronics, is ideally suited to outdoor use.
When lithium batteries are used, the key safe can also be used in extreme weather conditions (-40° to +60° Celsius).
There is plenty of space inside the safe with 21 key hooks that can be removed as an option.
Prices incl. VAT plus shipping costs
extra corrosion resistant
masunt Key safe 2140 E Code | extra corrosion resistant
€439.00*
With the new key safe from masunt, the highest demands on key delivery are met. The key safe offers all the advantages of the 1100 series, which has been tried and tested for years, and is even more resistant and robust. Allow guests, employees and service providers access even outside opening hours - around the clock - and thus increase turnover or improve processes.
The key safe is made of high-quality V4A stainless steel. This type of stainless steel is particularly suitable for regions near the sea and coastal regions.
The masunt key safe 2140 E code at a glance:
Pariticularly secure due to 3-point closure and 3 mm wall thickness
Suitable for outdoor use
Four-digit manual code or seven-digit online code
Codes can be conveniently assigned remotely via web portal
No Internet or mobile phone connection necessary
No power connection required
Outstanding appearance thanks to brushed stainless steel
Security
Since it has walls made of 3 mm-thick stainless steel and a particularly robust three-point lock, the product satisfies stringent security requirements with regard to key handover.
Innovation
A special process is used for storing and accessing deposited valuable objects and keys. This enables the remote generation of codes and assignment to recipients – without electricity supply or internet connection.
Code generation and hand-over
Each compartment can be operated manually with a 4-digit user code. An 7-digit master code is available too. This is used by the owner/manager and serves to open and programme the safe. Code generation can also be done by an online platform. This offers secure, easy to understand and quick operation. The 7-digit codes generated this way have a temporary validity (from 1 hour up to 365 days) and can be conveniently transmitted to the respective users. This service is provided by our cooperation partner, Codelocks Ltd.
Finishing and aesthetic
The key safe is solidly constructed with high-quality AISI 304 stainless steel. If using in regions close to seawater opt for the AISI 316 stainless steel version. Not only does this special steel help achieve a durable product, it guarantees high-end design – impress your customers with brushed stainless steel!
Outdoor use
The key safe is designed for both indoor and outdoor use since it is manufactured from high-quality stainless steel and the electronics are designed for use outdoors.
Prices incl. VAT plus shipping costs
extra corrosion resistant
masunt Key safe 1140 E Code | extra corrosion resistant
€369.00*
The key safe classic from masunt: Allow guests, employees and service providers access even outside opening hours - around the clock - and thus increase turnover and improve processes. Whether via a four-digit manual code or via the innovative, seven-digit online code - you decide.
The key safe is made of high-quality V4A stainless steel. This type of stainless steel is particularly suitable for regions near the sea and coastal regions.
The masunt 1140 Key safe at a glance:
Suitable for outdoor use
Four-digit manual code or seven-digit online code
Codes can be conveniently assigned remotely via a web portal
No internet or mobile phone connection required at the unit
No power connection required
Outstanding appearance due to brushed stainless steel
Proven in use for over 9 years
Innovation
A special process is used for storing and accessing deposited valuable objects and keys. This enables the remote generation of codes and assignment to recipients – without electricity supply or internet connection.
Code generation and hand-over
Each compartment can be operated manually with a 4-digit user code. An 8-digit master code is available too. This is used by the owner/manager and serves to open and programme the safe. Code generation can also be done by an online platform. This offers secure, easy to understand and quick operation. The 7-digit codes generated this way have a temporary validity (from 1 hour up to 365 days) and can be conveniently transmitted to the respective users. This service is provided by our cooperation partner, Codelocks Ltd.
Finishing and aesthetic
The key safe is solidly constructed with high-quality AISI 316 stainless steel for use in regions close to seawater. Not only does this special steel help achieve a durable product, it guarantees high-end design – impress your customers with brushed stainless steel!
Versions and outdoor use
The key safe is offered in a single-compartment and 4-compartment version. The 4-compartment version is best suited to hotels or companies that require to hand over several keys to several people at short notice. Both versions offer both indoor and outdoor use since both are manufactured from the same high-quality stainless steel and the electronics are designed for use outdoors.
Prices incl. VAT plus shipping costs
masunt Key safe 1120 E Code
€329.00*
Material:
AISI 304
The key safe bestseller from masunt: Allowing guests, employees and service providers access even outside opening hours - around the clock - thus increasing turnover and improving processes. Whether via a four-digit manual code or via the innovative, seven-digit online code - you decide.
The masunt 1120 Key safe at a glance:
Suitable for outdoor use
Four-digit manual code or seven-digit online code
Codes can be conveniently assigned remotely via a web portal
No internet or mobile phone connection required at the unit
No power connection required
Outstanding appearance due to brushed stainless steel
Proven in use for over 9 years
Innovation
A special process is used for storing and accessing deposited valuable objects and keys. This enables the remote generation of codes and assignment to recipients – without electricity supply or internet connection.
Code generation and hand-over
Each compartment can be operated manually with a 4-digit user code.An 8-digit master code is available too. This is used by the owner/manager and serves to open and programme the safe. Code generation can also be done by an online platform. This offers secure, easy to understand and quick operation. The 7-digit codes generated this way have a temporary validity (from 1 hour up to 365 days) and can be conveniently transmitted to the respective users. This service is provided by our cooperation partner, Codelocks Ltd.
Finishing and aesthetic
The key safe is solidly constructed with high-quality AISI 304 stainless steel. If using in regions close to seawater opt for the AISI 316 stainless steel version. Not only does this special steel help achieve a durable product, it guarantees high-end design – impress your customers with brushed stainless steel!
Versions and outdoor use
The key safe is offered in a single-compartment and 4-compartment version. The 4-compartment version is best suited to hotels or companies that require to hand over several keys to several people at short notice. Both versions offer both indoor and outdoor use since both are manufactured from the same high-quality stainless steel and the electronics are designed for use outdoors.
Prices incl. VAT plus shipping costs
masunt Key safe 1420 E Code
€999.00*
Material:
AISI 304
The key safe is popular with guesthouses and hotels: Hand over up to 12 keys with 4 separately controllable compartments. Allow guests, employees and service providers access outside opening hours - around the clock - and thus increase turnover and improve processes. Whether via a four-digit manual code or via the innovative, seven-digit online code - you decide. Save time and offer your guests convenient day and night through secure key transfer.
The masunt Key safe 1420 E Code at a glance:
The clever 4-in-1 solution
Suitable for outdoor use
Four-digit manual code or seven-digit online code
Codes can be conveniently issued remotely via a web portal
No internet or mobile phone connection required at the unit
No power connection required
Outstanding appearance due to brushed stainless steel
Proven in use for over 9 years
Innovation
A special process is used for storing and accessing deposited valuable objects and keys. This enables the remote generation of codes and assignment to recipients – without electricity supply or internet connection.
Code generation and hand-over
Each compartment can be operated manually with a 4-digit user code. An 7-digit master code is available too. This is used by the owner/manager and serves to open and programme the safe. Code generation can also be done by an online platform. This offers secure, easy to understand and quick operation. The 7-digit codes generated this way have a temporary validity (from 1 hour up to 365 days) and can be conveniently transmitted to the respective users. This service is provided by our cooperation partner, Codelocks Ltd.
Finishing and aesthetic
The key safe is solidly constructed with high-quality AISI 304 stainless steel. If using in regions close to seawater opt for the AISI 316 stainless steel version. Not only does this special steel help achieve a durable product, it guarantees high-end design – impress your customers with brushed stainless steel!
Versions and outdoor use
The key safe is offered in a single-compartment and 4-compartment version. The 4-compartment version is best suited to hotels or companies that require to hand over several keys to several people at short notice. Both versions offer both indoor and outdoor use since both are manufactured from the same high-quality stainless steel and the electronics are designed for use outdoors.
Prices incl. VAT plus shipping costs
masunt Key safe XL 2125 E Code
€799.00*
masunt is expanding its product range to include another variant of the popular key safe. The masunt 2125 E Code key safe is the XL version of the 2120 E Code key safe. The 2125 E Code key safe relies on tried-and-tested quality and is just as robust and resistant. It offers more space with 21 key hooks that can be removed if necessary to enable storage and handover of larger items like tablets and laptops.
The masunt 2125 E Code key safe at a glance:
Meets the most stringent safety standards due to the three-point lock and walls measuring 3 mm thick
Brushed stainless steel that exudes simple elegance and a luxury appearance
Suitable for outdoor use
Choice of using manual codes (four or eight digits long) and, optionally, time-limited online codes (seven digits long)
No need for an internet connection or a radio link
Battery-operated, so no need for a power connection
Classic use – innovative online code allocation
The 2125 E Code key safe can be operated the classic way with a manual code – assigned directly on the unit. But it’s the seven-digit online codes that make this key safe truly innovative. They can be generated using an online portal and are valid for a limited period of time only. The validity period can range from one hour to 365 days. What’s more, the online codes created in this way can be sent directly from the web portal to users by text message or email. Another helpful option is the text message code request feature. This allows authorised individuals with an ID to retrieve a code that is valid for two hours using the online portal. These retrievals are documented and can be traced. The online portal is operated by Codelocks Ltd., our cooperation partner. One credit each is required to generate an online code and for the text message code request feature. Credits must be purchased in advance (prepaid). There are no ongoing costs or contractual commitments. Read our FAQs to find out more about operating and using the key safe.
Areas of application and potential uses
Since it enables the allocation of time-limited online codes, the key safe is suitable for conveniently and contactlessly handing over a large number of keys to guests, employees or even service providers. The extra hooks also make the 2125 key safe ideal for the intended uses (organising and managing keys), so it could be an interesting solution for car rental companies and garages too.
The 2125 key safe is made of high-grade V2A stainless steel (AISI 304). In combination with the protected electronics, the key safe is suitable for outdoor use and is appropriately weatherproof.
Prices incl. VAT plus shipping costs
masunt Key depot combination lock 520 M Code
€199.00*
Material:
AISI 304
The masunt key deposit box is used to store and deposit property keys or other access media.The housing’s walls are 3 mm thick, and are optionally available in stainless steel quality AISI 304 or AISI 316.
The Key depot 520 M Code at a glance:
High-quality lock design with four-digit combination
Automatic code blurring during every opening and closing operation (Opening the safe will automatically set back the code to 0000. Hence there is no more need to readjust the code combination as you are used from standard luggage or bike locks. The programmed opening code within the lock is not changed through this procedure until you do so manually.)
Code identification and emergency opening by means of a service key
Code can be modified without auxiliary means
Constructed for use in the protected outdoor area
A seal in the key deposit box’s frame ensures faultless door locking.The key deposit box is attached using two slots on the rear (the fastening material for standard masonry is included in the scope of supply).Both surface and flush-mounted installation are possible.
Prices incl. VAT plus shipping costs
extra corrosion resistant
masunt Key safe 1141 RFID | extra corrosion resistant
€389.00*
This key safe uses RFID technology as an access control system.
Authorised individuals are given access to the key safe with the registered transponder medium. The process is automatic and contactless. There’s no need to use another key or input a code. Enable employees and service providers to efficiently gain access even outside of operating and opening hours – around the clock – while you retain complete control.
The key safe at a glance:
Contactless identification of up to 50 individual access media
No internet or power connection required. The lock is battery-operated (with two AAA batteries), which allows 15,000 opening operations
If the red LED lights up, this indicates that the battery is low
Resistant to external influences like dirt or moisture, making it suitable for continuous outdoor use
Robust, brushed stainless steel housing with an elegant finish (V2A)
Technology
The key safe supports the following RFID standards:
MIFARE Classic 1K
MIFARE Classic 4K
MIFARE DESFire EV1
MIFARE DESFire EV2
MIFARE Ultralight EV1
Existing RFID media that meet these standards can be used, no new RFID media need to be purchased.
Data is exchanged between the transponder and the reader by means of an (electro-)magnetic field. The passive transponder is supplied with energy as soon as it approaches the reader, thus enabling data exchange. There is no need for an internet or power connection. The closing motor, on the other hand, is battery-operated and allows up to 15,000 opening operations with just two AAA batteries.
Access allocation
The enclosed master card allows you to flexibly add new users and remove existing ones. From the time they are added, registered users will have access to the key safe and be able to open it contactlessly using their access medium. In contrast, unregistered media will be unable to unlock the lock.
Material and space requirements
The housing made of high-quality stainless steel measuring 2 mm thick is sturdy, secure and weatherproof. The RFID lock is also resistant to the elements and, with its protected electronics, is ideally suited to outdoor use.
When lithium batteries are used, the key safe can also be used in extreme weather conditions (-40° to +60° Celsius).
The interior of the safe offers plenty space. The three hooks on the back wall can even accommodate chunky keys (e.g. keys with fobs or vehicle keys).
Prices incl. VAT plus shipping costs
extra corrosion resistant
masunt Key safe 2141 RFID | extra corrosion resistant
€449.00*
This key safe uses RFID technology as an access control system.
Authorised individuals are given access to the key safe with the registered transponder medium. The process is automatic and contactless. There’s no need to use another key or input a code. Enable employees and service providers to efficiently gain access even outside of operating and opening hours – around the clock – while you retain complete control.
The 2121 RFID key safe at a glance:
Contactless identification of up to 50 individual access media
No internet or power connection required. The lock is battery-operated (with two AAA batteries), which allows 15,000 opening operations
If the red LED lights up, this indicates that the battery is low
Resistant to external influences like dirt or moisture, making it suitable for continuous outdoor use
Robust, brushed stainless steel housing with an elegant finish (V2A)
Particularly secure due to the three-point lock and wall thickness of 3 mm
Suitable for outdoor use
Technology
The key safe supports the following RFID standards:
MIFARE Classic 1K
MIFARE Classic 4K
MIFARE DESFire EV1
MIFARE DESFire EV2
MIFARE Ultralight EV1
Existing RFID media that meet these standards can be used, no new RFID media need to be purchased.
Data is exchanged between the transponder and the reader by means of an (electro-)magnetic field. The passive transponder is supplied with energy as soon as it approaches the reader, thus enabling data exchange. There is no need for an internet or power connection. The closing motor, on the other hand, is battery-operated and allows up to 15,000 opening operations with just two AAA batteries.
Access allocation
The enclosed master card allows you to flexibly add new users and remove existing ones. From the time they are added, registered users will have access to the key safe and be able to open it contactlessly using their access medium. In contrast, unregistered media will be unable to unlock the lock.
Material and space requirements
The housing made of high-quality stainless steel measuring 3 mm thick is sturdy, secure and weatherproof. The RFID lock is also resistant to the elements and, with its protected electronics, is ideally suited to outdoor use.
When lithium batteries are used, the key safe can also be used in extreme weather conditions (-40° to +60° Celsius).
The interior of the safe offers plenty space. The three hooks on the back wall can even accommodate chunky keys (e.g. keys with fobs or vehicle keys).
Prices incl. VAT plus shipping costs
extra corrosion resistant
masunt Key safe XL 2146 RFID | extra corrosion resistant
€849.00*
The 2146 RFID key safe is the XL version of our 2141 RFID key safe and offers space for up to 21 keys. The 21 key hooks can be removed if necessary to enable storage and handover of larger items like tablets and laptops.
This key safe uses RFID technology as an access control system.
Authorised individuals are given access to the key safe with the registered transponder medium. The process is automatic and contactless. There’s no need to use another key or input a code. Enable employees and service providers to efficiently gain access even outside of operating and opening hours – around the clock – while you retain complete control.
The 2146 RFID key safe at a glance:
Contactless identification of up to 50 individual access media
No internet or power connection required. The lock is battery-operated (with two AAA batteries), which allows 15,000 opening operations
If the red LED lights up, this indicates that the battery is low
Resistant to external influences like dirt or moisture, making it suitable for continuous outdoor use
Robust, brushed stainless steel housing with an elegant finish (AISI 316)
Particularly secure due to the three-point lock and wall thickness of 3 mm
Suitable for outdoor use
Space for up to 21 keys
Technology
The key safe supports the following RFID standards:
MIFARE Classic 1K
MIFARE Classic 4K
MIFARE DESFire EV1
MIFARE DESFire EV2
MIFARE Ultralight EV1
Existing RFID media that meet these standards can be used, no new RFID media need to be purchased.
Data is exchanged between the transponder and the reader by means of an (electro-)magnetic field. The passive transponder is supplied with energy as soon as it approaches the reader, thus enabling data exchange. There is no need for an internet or power connection. The closing motor, on the other hand, is battery-operated and allows up to 15,000 opening operations with just two AAA batteries.
Access allocation
The enclosed master card allows you to flexibly add new users and remove existing ones. From the time they are added, registered users will have access to the key safe and be able to open it contactlessly using their access medium. In contrast, unregistered media will be unable to unlock the lock.
Material and space requirements
The housing made of high-quality stainless steel measuring 3 mm thick is sturdy, secure and weatherproof. The RFID lock is also resistant to the elements and, with its protected electronics, is ideally suited to outdoor use.
When lithium batteries are used, the key safe can also be used in extreme weather conditions (-40° to +60° Celsius).
There is plenty of space inside the safe with 21 key hooks that can be removed as an option.
Prices incl. VAT plus shipping costs
masunt Key return safe 2129
€899.00*
With the new 2129 key return safe, masunt offers all the advantages of the 2125 E Code key safe, plus an integrated one-way deposit flap for secure key return.
The 2129 key return safe relies on tried-and-tested quality and is just as robust and resistant. The safe was designed so that even chunky keys the size of a credit card fit through the one-way deposit flap. So storing the likes of modern car keys inserted through the one-way deposit flap is simple and straightforward too.
The keys are deposited using the flap on the right-hand side of the housing. The keys fall into the safe by means of a slide structure. Since the stainless steel slide is locked, it is impossible to fish the keys out of the safe from the outside.
Thanks to the large-walled limitations on the right and left of the inside of the one-way deposit flap, you can rest assured that the keys will remain on the loading area when the safe is opened.
The masunt 2129 Key return safe at a glance:
Meets the most stringent safety standards due to the three-point lock and walls measuring 3 mm thick
Integrated one-way deposit flap for securely returning keys
Brushed stainless steel that exudes simple elegance and a luxury appearance
Suitable for outdoor use
Choice of using manual codes (four or eight digits long) and, optionally, time-limited online codes (seven digits long)
No need for an internet connection or a radio link
Battery-operated, so no need for a power connection
Classic use – innovative online code allocation
The 2129 key return safe can be operated the classic way with a manual code – assigned directly on the unit. But it’s the seven-digit online codes that make this key safe truly innovative. They can be generated using an online portal and are valid for a limited period of time only. The validity period can range from one hour to 365 days. What’s more, the online codes created in this way can be sent directly from the web portal to users by text message or email. Another helpful option is the text message code request feature. This allows authorised individuals with an ID to retrieve a code that is valid for two hours using the online portal. These retrievals are documented and can be traced. The online portal is operated by Codelocks Ltd., our cooperation partner. One credit each is required to generate an online code and for the text message code request feature. Credits must be purchased in advance (prepaid). There are no ongoing costs or contractual commitments. Read our FAQs to find out more about operating and using the key safe.
Areas of application and potential uses
The key safe provides owners with a simple and convenient way of retrieving keys from customers and guests. It is also a useful addition and extension to the masunt compartment safes and E code models. The one-way deposit flap makes the 2129 key return safe particularly suitable for garages, car dealerships and hotels.
The 2129 key return safe is made of high-grade V2A stainless steel (AISI 304). In combination with the protected electronics, the key return safe is suitable for outdoor use and is appropriately weatherproof.
Prices incl. VAT plus shipping costs
extra corrosion resistant
masunt Key safe 1440 E Code | extra corrosion resistant
€1,169.00*
The key safe is popular with guesthouses and hotels: Hand over up to 12 keys with 4 separately controllable compartments. Allow guests, employees and service providers access outside opening hours - around the clock - and thus increase turnover and improve processes. Whether via a four-digit manual code or via the innovative, seven-digit online code - you decide. Save time and offer your guests convenient day and night through secure key transfer.
The key safe is made of high-quality V4A stainless steel. This type of stainless steel is particularly suitable for regions near the sea and coastal regions.
The masunt Key safe 1440 E Code at a glance:
The clever 4-in-1 solution
Suitable for outdoor use
Four-digit manual code or seven-digit online code
Codes can be conveniently issued remotely via a web portal
No internet or mobile phone connection required at the unit
No power connection required
Outstanding appearance due to brushed stainless steel
Proven in use for over 9 years
Innovation
A special process is used for storing and accessing deposited valuable objects and keys. This enables the remote generation of codes and assignment to recipients – without electricity supply or internet connection.
Code generation and hand-over
Each compartment can be operated manually with a 4-digit user code. An 7-digit master code is available too. This is used by the owner/manager and serves to open and programme the safe. Code generation can also be done by an online platform. This offers secure, easy to understand and quick operation. The 7-digit codes generated this way have a temporary validity (from 1 hour up to 365 days) and can be conveniently transmitted to the respective users. This service is provided by our cooperation partner, Codelocks Ltd.
Finishing and aesthetic
The key safe is solidly constructed with high-quality AISI 316 stainless steel for use in regions close to seawater. Not only does this special steel help achieve a durable product, it guarantees high-end design – impress your customers with brushed stainless steel!
Versions and outdoor use
The key safe is offered in a single-compartment and 4-compartment version. The 4-compartment version is best suited to hotels or companies that require to hand over several keys to several people at short notice. Both versions offer both indoor and outdoor use since both are manufactured from the same high-quality stainless steel and the electronics are designed for use outdoors.
Prices incl. VAT plus shipping costs
masunt Key depot 420 M Code
€179.00*
Discover the new masunt KeySafe 420 M Code, an affordable and efficient solution for securely storing and depositing your keys and access credentials. Based on the proven design of the 520 M Code, the 420 M Code model offers all the familiar features in a more compact and cost-effective format. The masunt KeySafe 420 M Code is characterized by its solid construction and reliable combination lock, combining security with user-friendliness. Ideal for vacation rentals, private households, and businesses that need a secure yet accessible place for keys.
The Key depot 420 M Code at a glance:
Robust combination lock: Easy to use, it provides high protection for your keys.
Innovative code reset system: If you forget your code, the code can be reset with a key.
Compact and durable construction: With a wall thickness of 2mm and made of high-quality AISI 304 stainless steel, it ensures longevity and resilience.
Space-saving dimensions: With external dimensions of 120 (W) x 60 (H) x 75 (D) mm, it fits almost anywhere.
Automatic code scrambling: After opening, the combination automatically resets, eliminating the need to manually adjust the code.
Easy installation: Screws and dowels for standard masonry are included.
Prices incl. VAT plus shipping costs
masunt Key safe 2120 E Code
€389.00*
Material:
AISI 304
With the new key safe from masunt, the highest demands on key delivery are met. The key safe offers all the advantages of the 1100 series, which has been tried and tested for years, and is even more resistant and robust. Allow guests, employees and service providers access even outside opening hours - around the clock - and thus increase turnover or improve processes.
The masunt key safe 2120 E code at a glance:
Pariticularly secure due to 3-point closure and 3 mm wall thickness
Suitable for outdoor use
Four-digit manual code or seven-digit online code
Codes can be conveniently assigned remotely via web portal
No Internet or mobile phone connection necessary
No power connection required
Outstanding appearance thanks to brushed stainless steel
Security
Since it has walls made of 3 mm-thick stainless steel and a particularly robust three-point lock, the product satisfies stringent security requirements with regard to key handover.
Innovation
A special process is used for storing and accessing deposited valuable objects and keys. This enables the remote generation of codes and assignment to recipients – without electricity supply or internet connection.
Code generation and hand-over
Each compartment can be operated manually with a 4-digit user code.An 8-digit master code is available too. This is used by the owner/manager and serves to open and programme the safe. Code generation can also be done by an online platform. This offers secure, easy to understand and quick operation. The 7-digit codes generated this way have a temporary validity (from 1 hour up to 365 days) and can be conveniently transmitted to the respective users. This service (www.kitlock.net) is provided by our cooperation partner, Codelocks Ltd.
Finishing and aesthetic
The key safe is solidly constructed with high-quality AISI 304 stainless steel. If using in regions close to seawater opt for the AISI 316 stainless steel version. Not only does this special steel help achieve a durable product, it guarantees high-end design – impress your customers with brushed stainless steel!
Outdoor use
The key safe is designed for both indoor and outdoor use since it is manufactured from high-quality stainless steel and the electronics are designed for use outdoors.
Prices incl. VAT plus shipping costs
extra corrosion resistant
masunt Key safe XL 2145 E Code I extra corrosion resistant
€849.00*
masunt is expanding its product range to include another variant of the popular key safe. The masunt 2145 E Code key safe is the XL version of the 2140 E Code key safe. The 2145 E Code key safe relies on tried-and-tested quality and is just as robust and resistant. It offers more space with 21 key hooks that can be removed if necessary to enable storage and handover of larger items like tablets and laptops.
The masunt 2145 E Code key safe at a glance:
Meets the most stringent safety standards due to the three-point lock and walls measuring 3 mm thick
Brushed stainless steel that exudes simple elegance and a luxury appearance
Suitable for outdoor use
Choice of using manual codes (four or eight digits long) and, optionally, time-limited online codes (seven digits long)
No need for an internet connection or a radio link
Battery-operated, so no need for a power connection
Classic use – innovative online code allocation
The 2145 E Code key safe can be operated the classic way with a manual code – assigned directly on the unit. But it’s the seven-digit online codes that make this key safe truly innovative. They can be generated using an online portal and are valid for a limited period of time only. The validity period can range from one hour to 365 days. What’s more, the online codes created in this way can be sent directly from the web portal to users by text message or email. Another helpful option is the text message code request feature. This allows authorised individuals with an ID to retrieve a code that is valid for two hours using the online portal. These retrievals are documented and can be traced. The online portal is operated by Codelocks Ltd., our cooperation partner. One credit each is required to generate an online code and for the text message code request feature. Credits must be purchased in advance (prepaid). There are no ongoing costs or contractual commitments. Read our FAQs to find out more about operating and using the key safe.
Areas of application and potential uses
Since it enables the allocation of time-limited online codes, the key safe is suitable for conveniently and contactlessly handing over a large number of keys to guests, employees or even service providers. The extra hooks also make the 2145 key safe ideal for the intended uses (organising and managing keys), so it could be an interesting solution for car rental companies and garages too.
The 2145 key safe is made of high-grade V4A stainless steel (AISI 316). In combination with the protected electronics, the key safe is suitable for outdoor use and is appropriately weatherproof.
Prices incl. VAT plus shipping costs
Skip product gallery
Related products
Wall for free-standing installation I Wall for E Code, M Code & R Code models (AISI 316)
€899.00*
The masunt E Code and R Code models can basically be surface-mounted and flush-mounted. If you would like a free-standing stainless steel wall, the wall shown as an example can be supplied too, fitted with different E Code models.
The wall for holding the E Code and R Code key safes is fitted with a roof with rain drainage and can be robustly anchored to the ground.
The free-standing wall can be supplied either as a screw-on or embedding version.
The price refers to the wall only, and the respective product to be mounted on the wall must be added.
You will find the products you can choose from here: E Codes category and R Codes category
Delivery with a pre-assembled product is included in the price.
The on-site assembly in question can be booked here too: Installation and setup service Montage- und Einrichtungsservice
Prices incl. VAT plus shipping costs
masunt Key deposit box wall for standalone outdoor installation I Individual deposit box placement (AISI 304)
€3,990.00*
Number of key deposit boxes:
1
The wall structure is standalone. This has major advantages:
No need to drill holes in the building façade.
DNo need to go through a lengthy coordination process with the property manager / homeowners’ association.
A potential alternative if the building’s outer walls do not allow safe installation.
The wall structure has walls measuring 3 mm thick and can be equipped with any number of key deposit boxes. The compact deposit boxes, which each come with a mechanical combination lock made of solid AISI 304 stainless steel (3 mm), cannot be broken into and can withstand the elements
Easy to use with a practical function: The four dials can be set precisely and automatically switch to ‘0000’ when the deposit box is opened, so unauthorised individuals cannot see what the access code is.
With key for emergency opening: The enclosed key can be used to open the safe if the user has forgotten the valid combination. The code is automatically displayed again when the deposit box is opened. The locks naturally have different closures.
High-quality appearance: An elegant design due to brushed stainless steel, integrated and continued through the wall structure. A real eye-catcher
The anchoring depth is at least 500 mm. The necessary foundation size depends on the soil conditions.
Please contact us directly if you’d like a larger number of key deposit boxes or the option of assembling them with other products (key safes / repositories) in a way that extends beyond the existing configuration.
Prices incl. VAT plus shipping costs
extra corrosion resistant
masunt Key deposit box wall for standalone outdoor installation I Individual deposit box placement (AISI 316)
€4,849.00*
Number of key deposit boxes:
1
The wall structure is standalone. This has major advantages:
No need to drill holes in the building façade.
DNo need to go through a lengthy coordination process with the property manager / homeowners’ association.
A potential alternative if the building’s outer walls do not allow safe installation.
The wall structure has walls measuring 3 mm thick and can be equipped with any number of key deposit boxes. The compact deposit boxes, which each come with a mechanical combination lock made of solid AISI 316 stainless steel (3 mm), cannot be broken into and can withstand the elements
Easy to use with a practical function: The four dials can be set precisely and automatically switch to ‘0000’ when the deposit box is opened, so unauthorised individuals cannot see what the access code is.
With key for emergency opening: The enclosed key can be used to open the safe if the user has forgotten the valid combination. The code is automatically displayed again when the deposit box is opened. The locks naturally have different closures.
High-quality appearance: An elegant design due to brushed stainless steel, integrated and continued through the wall structure. A real eye-catcher
The anchoring depth is at least 500 mm. The necessary foundation size depends on the soil conditions.
Please contact us directly if you’d like a larger number of key deposit boxes or the option of assembling them with other products (key safes / repositories) in a way that extends beyond the existing configuration.
Prices incl. VAT plus shipping costs